Most homeowners pay about $262 to have a kitchen faucet replaced and about $270 for a bathroom faucet. Those are national averages from Angi's kitchen faucet data and its bathroom faucet data. Typical ranges are $162 to $364 for a kitchen and $170 to $360 for a bathroom. Your final number depends on the faucet, the access under the sink and what the plumber finds when the old one comes out.
Below: what the price includes, what pushes it up, when replacing makes more sense than repairing, and how to compare quotes in Rogers and Northwest Arkansas.
TL;DR
- Expect roughly $162 to $364 for a kitchen faucet and $170 to $360 for a bathroom faucet, labor and fixture combined, based on national Angi figures.
- Touchless, bridge and specialty-finish models can push a project toward $500 to $900.
- Rusted shutoff valves, old supply lines and mismatched sink holes are the usual reasons a quote grows.
- Ask for an itemized estimate that states whether removing and hauling away the old faucet is included.
- If the faucet only drips, a repair may cost less than a replacement.
Table of Contents
- What faucet replacement costs on average
- Labor versus the faucet itself
- What pushes the price up
- Repair or replace?
- DIY or hire a plumber
- How to compare faucet replacement quotes
- Our perspective on faucet replacement
- Book faucet service in Rogers
- Ways to keep the cost down
- FAQ
- Sources
What faucet replacement costs on average
Prices vary by source, so here is how the numbers line up.
| Project | Typical range | Average |
|---|---|---|
| Kitchen faucet replacement | $162 to $364 | $262 |
| Bathroom faucet replacement | $170 to $360 | $270 |
| High-end features (touchless, specialty finish) | about $500 to $900 | n/a |
The kitchen average comes from Angi's data on 1,438 projects. The same source lists professional labor rates of $45 to $200 per hour.
You will see wider numbers elsewhere. Some sites quote a $40 basic chrome faucet at the low end and $2,000 for a premium copper model. Those figures describe the product, not the job. A realistic plan is to budget the faucet you want, then add labor.
Arkansas runs below the national picture for general plumbing work. One cost aggregator puts the average Arkansas plumbing repair at $248, against $310 nationally, with a leaky faucet fix at $100 to $250. Treat that as a rough guide. It is not a quote.
Labor versus the faucet itself
A quote has two parts: the fixture and the labor to install it.
The fixture
A basic single-handle faucet costs the least. Pull-down and pull-out kitchen models cost more. Touchless and bridge styles cost the most, and Angi notes that touchless and bridge models raise the project total. Finish matters too. Brushed nickel, matte black and bronze usually cost more than polished chrome.
The labor
A straightforward swap with accessible shutoff valves is often about a two-hour job. Labor goes up when:
- The space under the sink is cramped.
- Shutoff valves are corroded and will not close.
- Supply lines are old or the wrong length.
- The new faucet needs a different hole configuration.
- The plumber must disconnect a garbage disposal or dishwasher line to reach the work.
Many plumbers charge a minimum service fee, so a 45-minute job can still be billed as a full call. Ask about it when you book.
What pushes the price up
The national averages describe simple jobs. Here is where they stop applying.
Rusted or failing shutoff valves
If the stop valves under the sink will not turn, or break when touched, the plumber has to replace them. That is extra parts and extra time. Angi reports that rusted pipe connections and inadequate mounting holes are common surprises that add plumbing labor or structural changes and move the total past the first quote.
Sink and countertop mismatch
Faucets are built for a set number of holes and a set spread. A three-hole bathroom sink will not take a single-hole faucet cleanly without a cover plate. A stone or laminate countertop is a harder problem. Experts quoted by Angi advise checking that the new faucet's spread and mounting requirements match your existing setup before you buy, so you avoid expensive countertop changes. Plumbers generally do not drill stone.
Relocating the fixture
Moving a faucet means new supply lines and possibly new drain work. That is a remodel task, not a swap, and it is priced that way.
Water pressure problems
Pressure above 80 psi can damage fixtures. If the plumber finds high pressure, correcting it is a separate line item. Work like this sits in the same bucket as other unexpected utility upgrade costs that homeowners often fail to budget for.
Fixture type and flow rules
New kitchen faucets sold in the U.S. are limited to 2.2 gallons per minute. For bathroom sinks, the EPA's WaterSense label requires 1.5 gallons per minute or less. WaterSense models can cost a little more than generic ones. They are independently certified for performance and water savings, which many bargain models are not.
Repair or replace?
Not every faucet problem needs a new faucet. Compare the two options before you spend.
Repair makes sense when:
- The faucet is a few years old and drips from one handle. A worn cartridge or washer is often the cause.
- Flow has dropped. Scale in the aerator is a common culprit, and soaking it in white vinegar can restore performance, as the EPA's home maintenance tips suggest.
- The finish and fit still suit your sink.
Replace when:
- The body is corroded or pitted.
- Parts are no longer available.
- You have repaired it more than once.
- You are updating the kitchen or bathroom anyway.
Waste adds up. The EPA states that a drip every second wastes more than 3,000 gallons a year. Fixing it is not only about comfort. For a cost breakdown of the repair route, see our guide to what a leaky faucet repair costs. If the leak seems to come from the supply pipes rather than the fixture, background on pipe leakage causes and solutions helps you see why the source matters before you replace anything.
DIY or hire a plumber
A faucet swap is often called a beginner project. Angi calls it one of the simpler plumbing jobs, and it is still plumbing. A bad connection can leak inside the cabinet for weeks before you notice. That means water damage and possibly mold.
DIY is reasonable if:
- The shutoff valves work.
- The new faucet matches your existing holes.
- You have the right basin wrench and fittings.
Call a plumber if:
- The valves are seized.
- You see corrosion on the supply lines.
- You are installing a touchless, bridge or multi-piece faucet.
- The faucet is in a rental or a house you plan to sell, where a leak would be costly.
An old faucet on an incompatible mounting can turn a two-hour job into several days if parts do not match. Paying a pro often costs less than fixing a DIY mistake.
How to compare faucet replacement quotes
Two quotes for the same faucet can differ by $100 or more. Use the same checklist on each one.
- Is the faucet included? Some plumbers supply the fixture. Others install one you bought.
- Is it itemized? Labor, parts, supply lines and shutoff valves should each appear.
- Is disposal covered? Professional labor usually includes removing the old unit, but confirm before work starts to avoid a surprise fee.
- What triggers extra charges? Ask what happens if the valves fail or the holes do not match.
- Is there a service call fee or minimum? Get the amount in writing.
- Is the plumber licensed? Ask for the license before the work begins.
A flat quote you can read in thirty seconds beats a vague hourly estimate.
Our perspective on faucet replacement
We replace faucets as one part of daily service work in Rogers. The fixture is rarely the hard part. The surprises are under the sink: a stop valve that has not been turned in ten years, braided lines that are too short, or a sink with the wrong number of holes.
Our advice is simple:
- Pick the faucet first, then price the labor. Check hole count and spread before you buy.
- Replace old shutoff valves while the water is already off. It is a small cost now and a much larger one if a valve fails later.
- Do not use a faucet swap to ignore a bigger problem. Low pressure across the house, or damp cabinet floors, point to something beyond the fixture.
- Ask for the full price before we start. We believe a customer should know what the job costs, what it covers and what could change it.
If a repair will solve the problem, we say so. If the faucet needs replacing, we explain why.
— Jonathan
Book faucet service in Rogers
If you want a licensed technician to handle the swap, we handle faucet repair and installation in Rogers, AR for kitchens, bathrooms and utility sinks. We can also take care of related work in the same visit, such as toilets, supply lines and leak checks. If a faucet problem looks like a larger leak, our leak detection and repair team can trace it. Contact us through joco.plumbing to describe the job and book a visit.
Ways to keep the cost down
- Choose a standard configuration. Single-handle, single-hole faucets are the easiest to install.
- Buy a WaterSense model. The EPA says households can save about $250 over a faucet's lifetime by replacing old fixtures with WaterSense labeled ones, depending on the fixture and use.
- Bundle jobs. If you also need a toilet or a hose bib, one visit saves repeat service fees. See our guides on toilet replacement costs and hose bib replacement costs.
- Clear the cabinet. Empty the space under the sink before the plumber arrives. Easy access means fewer billable minutes.
- Do not wait on a leak. A small drip at the base of a faucet can rot a cabinet floor. That repair costs far more than the faucet.
FAQ
How much does it cost to install a kitchen faucet?
Professional kitchen faucet installation runs about $162 to $364 nationally, with an average near $262, according to Angi. Touchless and bridge models cost more. Rusted valves or a countertop that needs modification add to the total.
What is the labor cost to replace a faucet?
Plumber labor rates run $45 to $200 per hour, per Angi. A simple swap often takes about two hours. Cramped access, corroded valves and mismatched holes make it longer.
Does the quote include the faucet?
It depends on the plumber. Some supply the fixture and others install one you buy. Ask for an itemized quote that lists the fixture, labor, parts and disposal separately.
Is a leaky faucet cheaper to repair than replace?
Often, yes, if the faucet is newer and the leak comes from a worn cartridge or washer. Replace it when the body is corroded, parts are unavailable or repairs keep recurring. Either way, fix the leak soon, since a drip every second wastes over 3,000 gallons a year.
Sources
- Angi: How Much Does It Cost to Replace a Bathroom Faucet?
- Angi: Kitchen Faucet Installation Cost
- Angi: How to Replace a Kitchen Faucet
- EPA WaterSense: Bathroom Faucets
- EPA WaterSense: Statistics and Facts
- EPA WaterSense: Home Maintenance
- CostWhale: Plumbing Repair Cost in Arkansas
- Pipe leakage causes and solutions
- Utility upgrade cost planning